Jobs Board

Spray Painting Apprenticeship

164
Booval, QLD 4304
Automotive Vehicle Body Tradesperson (Vehicle Painting)
27/04/2021
Are you looking for a career as a Spray Painter?  We currently have a vacancy for a Spray Painting Apprentice for our busy host business based in Ipswich.  Please note this is a junior position If your apprenticeship has been cancelled or suspended due to a downturn in work and would like the opportunity to continue and complete your apprenticeship, please also apply now. Car and licence essential. Immediate start for the right applicant. To be considered for the Apprentice Spray Painter position you must have a genuine interest in this trade and: Have a strong attention to detail and be honest Having some experience in this trade is an advantage Have the motivation/drive to succeed in the trade Be punctual, reliable and have a good attendance record Have a positive attitude towards all aspects of the trade Follow instructions well and possession of good communication skills Able to Work safely Be open to gaining experience in all facets of the trade Police check required Only suitable applicants will be contacted.

Paid Trade Traineeship - Limited Spots Available!

163
West Ipswich, QLD 4305
-
23/04/2021
Opportunity highlights: Get paid to study and work 38 hrs/week 18-week duration Can lead into an Apprenticeship Ipswich Location Do you want a career in a trade but have little/no experience or certificates? This is a paid work/study program that will offer you an advantage over other applicants. PLEASE NOTE IF YOU HAVE ALREADY COMPLETED A CERT 1 IN CONSTRUCTION YOU MAY BE INELIGIBLE. Apprenticeships Queensland will be running a 18 week paid Traineeship with a combination of practical and theory experience in a real work situation. Having your P's or (close to getting) and a reliable car is essential. The traineeship will be conducted in Ipswich and a number of community job sites within 20 minutes of the area. You will : Earn a certificate 1 level qualification Gain practical experience in real work situations that align with your training Complete paid work that can be included in your work history Receive a mix of career advice, job preparation skills and foundation skills Upon successful completion of this certificate, opportunities may exist for apprenticeships in Construction or other trade areas in various locations. This Traineeship enables participants to develop the skills necessary to work in a variety of operational roles in the trade industry. Initial interviews will be via online interviewing, followed by interviews which will be held at our office in Ipswich to assess your eligibility. Traineeship hours: Monday to Thursday 7:30am to 3:30pm and Friday 7.30am to 1.30pm, commencing beginning of JUNE (QBCC Licence: 74979)

Certificate III in Individual Support (Aged Care) Course

162
West Ipswich, QLD 4305
Aged Care
22/04/2021
The Certificate III in Individual Support Course will equip you with the skills and knowledge to gain employment within the Aged Care environment, such as residential facilities or community services where you will work under the supervision of nurses or other health professionals. These skills include: providing personal care, assistance with daily routines and activities related to the residents’ individualised care plans, reporting and recording information to direct supervisors, respecting residents’ rights, dignity and privacy  communicating effectively with staff, residents and family. The Certificate III in Individual Support Course is also a great pathway into the Diploma of Nursing which could see you recognised as an Enrolled Nurse.  By doing this course it will also assist you to find employment in the disability and home care sector. RealCare Training partner with  The Learning Collaborative RTO #32350 - CHC33015 Certificate III in Individual Support - Disability and Ageing Specialities CHC43015 Certificate IV in Ageing Support Aspire to Succeed RTO #32555 CHC43115 Certificate IV in Disability Allens Training RTO #90909 HLTAID003 - Provide First Aid HLTAID001 - CPR

Painting and Decorating Apprenticeship

161
Brookwater, QLD 4300
Painter and Decorator
22/04/2021
Apprenticeships Queensland has a host based in the Brookwater area looking for an enthusiastic person wanting to do a Painting Apprenticeship. Please note: To apply for this position you must have had some experience, have a reliable car and licence, and be willing to travel to sites. If you have previously started a Painting Apprenticeship and wanting to continue in this trade we encourage you to apply. Job Description: The role of apprentice painter encompasses a variety of tasks to be completed in a timely and efficient manner. Apprentice painter is required to: - Attend jobs to prepare the area for work (lay drop sheets, tape up windows etc.) and clean job site on completion or at the end of the day - Prepare surfaces to a high standard (sanding, filling, caulking) - Painting all surfaces in a variety of paint types (water, oil, clear, varnishes) Qualifications: Skills- Strong communication skills to confidently explain information and converse with clients if required Takes pride in their work Is punctual and dedicated Showing initiative to tackle issues that may arise Working Conditions - Working indoors and outdoors- Working at heights Please note: This is a junior position

Mechanical Engineering Apprenticeship

160
Seventeen Mile Rocks, QLD 4073
Engineering - Mechanical
22/04/2021
This exciting opportunity will be perfect for a candidate that has a passion for mechanical engineering work and who is keen to develop a career in the Engineering sector.  This is a junior position. Recent school leavers encouraged to apply. This Apprenticeship as a Mechanical Engineering Apprentice offers the opportunity to further develop a fantastic array of skills and knowledge including hands on metal working, fitting of components, and metal machining plant and equipment which will provide invaluable for anyone who is eager to pursue a career in this industry.  What you'll bring to the table… To be successful in this role, you’ll need to meet the following selection criteria: Demonstrated interest and aptitude in the industry Certificate 2 in engineering with experience an advantage Physically fit to perform manual tasks Strong verbal and written communication and interpersonal skills Commitment to safety, quality and principles of continuous improvement Willing to undertake and pass drug & alcohol testing Demonstrate ability to work as part of a team Commitment to the full term of the apprenticeship (48 months) We are a culturally diverse employer and actively advocate for women in trades

Fitting Apprenticeship

159
Wacol, QLD 4076
Engineering Mechanical Trade (Fitter/Welder)
21/04/2021
Apprenticeships Queensland has a busy host in the Wacol area who's looking for a Fitting Apprentice. THIS IS A JUNIOR POSITION This is an exciting opportunity for someone who is enthusiastic and keen to get a hands-on start to their trade career. You will receive both on the job training and TAFE based training and receive mentoring from other trade qualified experts who also enjoy being ‘on the tools’ in a busy workshop environment. The successful applicant will possess: Certificate 2 in Engineering with some work experience an advantage A safe work ethic Genuine interest in their trade Willingness to learn Flexible can-do attitude Ability to work autonomously Ability to be a team player Own transportation  

Landscaping Apprenticeship

158
Jindalee, QLD 4074
Landscape Tradesperson
22/04/2021
Apprenticeships Queensland has a host who works on various sites so applicant must be prepared to travel. Throughout the apprenticeship, you will be undertaking a Certificate III in Landscape Construction. THIS IS A JUNIOR POSITION Duties that you will be responsible for but not limited too: Brick and stone structures Paving Retaining walls Plant and soil improvements for garden and turf areas Drainage installation Plant and soil practices including implementing plant establishment programs Project costing further into the apprenticeship Pre-Requisites: If you have already commenced a Landscape Construction apprenticeship, must have up to date TAFE transcripts Drivers licence and own transport Experience with using basic hand tools White card. To be successful: Have a passion for this trade and wants to be part of a growing business once completed apprenticeship Physically fit and not afraid of physically demanding work Well presented Great work ethic Dedicated and wanting to learn Follows direction well

Boilermaking Apprenticeship

157
Wacol, QLD 4076
Engineering Fabrication Trade (Boilermaking/Welding)
20/04/2021
Apprenticeships Queensland has a busy host in the Wacol area who's looking for a Boilermaking Apprentice. THIS IS A JUNIOR POSITION We are a culturally diverse employer and actively advocate for women in trades What you'll be doing… You will complete a Certificate III Fabrication over 48 months through a combination of formal training with a Registered Training Organisation (RTO) and practical on-the-job experience with the Host Employer. Throughout your formal training and practical experience in the workplace, you will have the opportunity to: Perform manual heating and thermal cutting Apply fabrication, forming and shaping techniques Assemble fabricated components Perform routine manual metal arc welding What you'll bring to the table… To be successful in this role, you’ll need to meet the following selection criteria: Demonstrated interest and aptitude in the industry Certificate 2 in engineering with experience an advantage Physically fit to perform manual tasks Strong verbal and written communication and interpersonal skills Commitment to safety, quality and principles of continuous improvement Willing to undertake and pass drug & alcohol testing Demonstrate ability to work as part of a team Commitment to the full term of the apprenticeship (48 months)

Spray Painting Apprenticeship

156
Wacol, QLD 4076
Automotive Vehicle Body Tradesperson (Vehicle Painting)
22/04/2021
Are you looking for a career as a Spray Painter?  Apprenticeships Queensland currently have a vacancy for a Spray Painting Apprentice for our busy host business based in Wacol..  Please note this is a junior position If your apprenticeship has been cancelled or suspended due to a downturn in work and would like the opportunity to continue and complete your apprenticeship, please also apply now. Car and licence essential. Immediate start for the right applicant. To be considered for the Apprentice Spray Painter position you must have a genuine interest in this trade and: Have a strong attention to detail and be honest Having some experience in this trade is an advantage Have the motivation/drive to succeed in the trade Be punctual, reliable and have a good attendance record Have a positive attitude towards all aspects of the trade Follow instructions well and possession of good communication skills Able to Work safely Be open to gaining experience in all facets of the trade Be willing to undertake and pass drug & alcohol testing We are a culturally diverse employer and actively advocate for women in trades

Boilermaking Apprenticeship

155
Wacol, QLD 4076
Engineering Fabrication Trade (Boilermaking/Welding)
21/04/2021
Apprenticeships Queensland has a busy host in the Wacol area who's looking for a Boilermaking Apprentice. THIS IS A JUNIOR POSITION We are a culturally diverse employer and actively advocate for women in trades What you'll be doing… You will complete a Certificate III Fabrication over 48 months through a combination of formal training with a Registered Training Organisation (RTO) and practical on-the-job experience with the Host Employer. Throughout your formal training and practical experience in the workplace, you will have the opportunity to: Perform manual heating and thermal cutting Apply fabrication, forming and shaping techniques Assemble fabricated components Perform routine manual metal arc welding What you'll bring to the table… To be successful in this role, you’ll need to meet the following selection criteria: Demonstrated interest and aptitude in the industry Certificate 2 in engineering with experience an advantage Physically fit to perform manual tasks Strong verbal and written communication and interpersonal skills Commitment to safety, quality and principles of continuous improvement Willing to undertake and pass drug & alcohol testing Demonstrate ability to work as part of a team Commitment to the full term of the apprenticeship (48 months)

Boilermaking Apprenticeship

153
Carole Park, QLD 4300
Engineering Fabrication Trade (Boilermaking/Welding)
16/04/2021
Apprenticeships Queensland has a busy host in the Carole Park area who's looking for a Boilermaking Apprentice. THIS IS A JUNIOR POSITION We are a culturally diverse employer and actively advocate for women in trades What you'll be doing… You will complete a Certificate III Fabrication over 48 months through a combination of formal training with a Registered Training Organisation (RTO) and practical on-the-job experience with the Host Employer. Throughout your formal training and practical experience in the workplace, you will have the opportunity to: Perform manual heating and thermal cutting Apply fabrication, forming and shaping techniques Assemble fabricated components Perform routine manual metal arc welding What you'll bring to the table… To be successful in this role, you’ll need to meet the following selection criteria: Demonstrated interest and aptitude in the industry Certificate 2 in engineering with experience an advantage Physically fit to perform manual tasks Strong verbal and written communication and interpersonal skills Commitment to safety, quality and principles of continuous improvement Willing to undertake and pass drug & alcohol testing Demonstrate ability to work as part of a team Commitment to the full term of the apprenticeship (48 months)

Boilermaking Apprenticeship

152
Larapinta, QLD 4110
Engineering Fabrication Trade (Boilermaking/Welding)
15/04/2021
Apprenticeships Queensland has a busy host in the Larapinta area who's looking for a Boilermaking Apprentice. THIS IS A JUNIOR POSITION We are a culturally diverse employer and actively advocate for women in trades What you'll be doing… You will complete a Certificate III Fabrication over 48 months through a combination of formal training with a Registered Training Organisation (RTO) and practical on-the-job experience with the Host Employer. Throughout your formal training and practical experience in the workplace, you will have the opportunity to: Perform manual heating and thermal cutting Apply fabrication, forming and shaping techniques Assemble fabricated components Perform routine manual metal arc welding What you'll bring to the table… To be successful in this role, you’ll need to meet the following selection criteria: Demonstrated interest and aptitude in the industry Certificate 2 in engineering with experience an advantage Physically fit to perform manual tasks Strong verbal and written communication and interpersonal skills Commitment to safety, quality and principles of continuous improvement Willing to undertake and pass drug & alcohol testing Demonstrate ability to work as part of a team Commitment to the full term of the apprenticeship (48 months)